Composite FRP Transparent Roofing Sheet

Translucent roofing sheet Composite/FRP is a fiber-reinforced plastic sheet used to bring natural light into roofs or walls. Hưng Thịnh Phát manufactures and supplies the lines Maxlight, Maxcool, Natalight, flat sheets and Kliplok sheets; the final specifications are confirmed according to the roof profile, color, thickness, length, and the profile of each order.

This page does not use a luminous number, lifespan, or warranty for all products. Those indicators vary according to configuration and are only valid when stated on the quotation, technical sheet, or warranty conditions of the specific product.

What is the Composite roofing skylight panel?

Within the range of products on this page, FRP is a fiber-reinforced polymer material; “Composite” is a broader term for composite materials. The specific composition of the resin system, reinforcement layer, surface layer, and additives must be referenced in the documentation of each product line. Composite/FRP sheets should not be assumed to be Polycarbonate sheets.

Polycarbonate (PC) and Composite/FRP are two different groups of materials. Therefore, the specifications of PC sheets such as material label, co-extrusion technology, impact resistance, or surface coating cannot be used in place of FRP sheet specifications if notthere is documentation to confirm.

Product table of skylight roofing sheets

The table below uses the specifications published on each product page. “Confirm” means that a common number is not used for all orders; the customer needs to receive a technical datasheet or written confirmation before purchasing.

Choose product line and profile

Maxlight and Natalight

Maxlight and Natalight There are wave pattern options being published. When roofing alternately with metal sheets, it is necessary to check the wave pitch, wave height, total width, useful width, and overlap edge; the names '9 waves' or '12 waves' are not enough to conclude that the two sheets match.

Maxcool, flat panels and industrial panels

Maxcool waveforms, Flat sheet Maxlight, Maxcool flat plate and industrial skylight panel Kliplok Serve different requirements. For flat panels Maxcool, the specific material needs to be confirmed on the technical data sheet instead of being inferred from the brand name.sale.

Which specifications must be finalized before orderinggoods?

• Material: FRP/Composite, PC or other configurations must be specified; do not use two names interchangeably.
• Profile: the number of waves, the wavelength, the wave height, the shape of the crest of the wave, the dimension of the overlap of the eyelids, and the useful gauge.
• Thickness: Choose by profile, support span, wind load, maintenance travel conditions, and data of the right product.
• Length: According to the roof plan, vertical seam overlap, production capability, transportation, and lifting the panels onto the roof.
• Color and light transmission: Confirm according to color sample and technical sheet; do not infer by eye from screen images.
• UV, chemical and fire: Specify the building requirements and only accept claims associated with the test documentation of the correct configuration.
• Warranty: check the deadlines, installation conditions, exclusion environments, documents to be kept, and how to handle complaints.

Select panels based on project application

How is the price of transparent roofing sheets Composite calculated?

There is no single correct price for every configuration. The quotation depends on the confirmed material, profile, thickness, color, length, quantity, accessories, delivery location, and documentation requirements. To make a proper comparison, it is necessary to match the same effective width, thickness, and delivery scope; not just compare prices per linear meter.

View how to prepare estimates for skylight roofing Composite, then send drawings or roof cross-section photos via the page Request a Quote.

Composite/FRP, Polycarbonate and glass, how are they different?

Read detailed analysis at FRP/Composite and Polycarbonate are different when making skylightsThe words "durable", "UV-resistant", "chemical-resistant", or "fire-resistant" should only be used with conditions and the source of the correct product.

Construction, purlin spacing and leak prevention

1. Re-measure roof profiles and confirm overlapping surfaces before production.
2. The design or construction unit determines the support spacing according to the load, allowable deflection, and the data of the specific panel; do not use a fixed spacing for all thicknesses.
3. Use suitable screws, dragons and sealing materials; arrange the holes and slots according to the instructions so as not to lock the expansion.
4. Do not step directly on the skylight panel. There must be a working platform, fall protection equipment, and measures for working at height.
5. Acceptance of the overlapping direction, screw position, flatness, sealing point and drainage flow before handover.

Related instructions: how to measure wave pitch and effective width, How to choose the thickness, diagnose yellowing, brittleness, or leakage.

Data required from the manufacturerexport

Hưng Thịnh Phát has a factory in Long An and supplies products according to confirmed specifications. Before signing an order, customers should request the documentation corresponding toRisk level of the construction:

• Quotations or confirmation slips must correctly state the material name, brand, profile, width, thickness, length, color, and quantity.
• Cross-section drawing or sample reference for the existing roof.
• Technical data sheets, test results, or certifications when the contract requires specifications for light transmission, UV, mechanical properties, chemical resistance, or fire.
• Written warranty conditions for the correct configuration, including construction and maintenance requirements.
• Photos, QC records, or approval samples according to project agreement.

Related technical instructions

Frequently asked questions

Is Composite skylight roofing the same as Polycarbonate?

No. Composite/FRP and Polycarbonate are two different material groups. Check the technical sheet of the actual product rather than guessing based on the trade name or old content.

What is the light transmission?

Depends on configuration, color, thickness, and surface condition. Hưng Thịnh Phát needs to be confirmed with samples and technical datasheets for specific products; this page does not publish a general rate for the entire catalog.

Is the sheet UV-resistant, chemical-resistant, or fire-resistant?

Only conclude when there is a corresponding configuration and documentation. It is necessary to clearly state the agent, exposure conditions, and project testing requirements before selection.

Lifespan and warranty duration?

A common reference point should not be used. Actual lifespan depends on materials, UV, environment, load, installation, and maintenance; the warranty period must be read on the order documentation.

What needs to be sent to receive a quote?

Send location, application, photos or profile drawings, effective width, length, expected thickness, color, quantity, and special technical requirements. If there is not enough data, the technical department will indicate the content that needs confirmation.